Festool

Redesigned for 2008, the height has been adjusted to make work more comfortable. New V-groove channels make adjustments both faster and easier. Both the fence and the miter gauge have been redesigned for better stability and more accurate results. The MFT/3 has 85% more working area than the older MFT 800, and is 15% lighter than the MFT 1080. Even though the MFT/3 has many improvements, we did not abandon features that you have come to trust and enjoy?features like perforated tops, side...

EVA edge banding adhesive in natural color to match most natural wood edge banding. Pack of 48.

A great all around sander, the DTS 400 is designed for fine sanding small, angular surfaces that are difficult to reach. With a short 5/64" (2 mm) stroke, this sander gives you a super-fine finished surface. Both compact and light weight (2.4 lbs), the DTS 400 is the ideal sander for working on vertical and overhead surfaces. Step-less variable speed improves working results and the vibration-stop balancing makes your work less tiring.

A sander well-suited for a wide range of one-handed applications, the RTS 400 is ideal for working on flat, vertical, and overhead surfaces because of its compact design and weight of only 2.4 lbs. Like the DTS 400, step-less variable speed improves working results, and vibration-stop balancing reduces fatigue during prolonged use.

This new accessory offers greater capability to the guide rail system by providing a faster, easier, smarter way to create consistent rip cuts. The Parallel Guide Set is comprised of the Parallel Guides (495717) and Parallel Guide Extensions (495718) and offers savings versus purchasing these two products separately.The Parallel Guides are the longer sections and offer consistent rip cuts using two adjustable stops that engage the edge of the material parallel to the cut line. They are...

The Festool HL 850 Planer allows you to create perfectly smooth surfaces as well as distressed or rough-hewn effects with a quick-change cutterhead system that enables you to swap out heads in matter of seconds . Create exotic textures and add character to your work by simply replacing the standard planer head with one of three rustic heads. Produce fine or coarse wavy textures, or a scalloped effect to mimic a hand-hewn appearance. Spiral cutter engages the material with a slicing action,...

Using an electric planer right up to the edge or on rabbets often produces unsatisfactory results. With Festool's HL 850, users can cut flush to an adjacent surface, as it planes across the entire width of the rabbet itself. With the planer head mounted to one side, it sits flush with the opposite side of the planer housing.

13' Replacement.

The perfect complement to the Festool MFT or Guide rail system, the Festool Quick Clamp secures your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Ratcheting mechanism enables easy locking and quick release for a secure grip on your material. Designed to work seamlessly with holes and channels on the the Festool MFT Multifunction Table and can be inserted into bottom t-slot of Festool FS Guide Rails for limitless positioning. Clamping...

Replacement Antistatic Reducing Sleeve For D 36 (36mm) Suction Hose with rotating adapter. Use the Antistatic Reducing Sleeve to replace a damaged tool end of your extraction hose. Use replacement reducing sleeves and rotating connectors to create new custom sized hoses from longer lengths. Antistatic components are only effective when used as part of a complete antistatic dust extraction system, including extractors or vacuums, hoses, sleeves and couplings. Includes one Antistatic Reducing...

Replacement Antistatic Reducing Sleeve For D 27 (27mm) Suction Hose with rotating adapter. Use the Antistatic Reducing Sleeve to replace a damaged tool end of your extraction hose. Use replacement reducing sleeves and rotating connectors to create new custom sized hoses from longer lengths. Antistatic components are only effective when used as part of a complete antistatic dust extraction system, including extractors or vacuums, hoses, sleeves and couplings. Includes one Antistatic Reducing...

Replacement Rotating Hose Connector for attaching Festool Antistatic D 27 (27mm) hoses to the inlet of the CT 22 and CT 33 Dust Extractors. External diameter 58 mm. Use replacement rotating connectors and reducing sleeves to create new custom sized hoses from longer lengths, or use to replace damaged parts. Antistatic components are only effective when used as part of a complete antistatic dust extraction system, including extractors or vacuums, hoses, sleeves and couplings. Includes one...

Replacement Rotating Hose Connector for attaching Festool Antistatic D 36 (36mm) hoses to the inlet of the CT 22 and CT 33 Dust Extractors. External diameter 58 mm. Use replacement rotating connectors and reducing sleeves to create new custom sized hoses from longer lengths, or use to replace damaged parts. Antistatic components are only effective when used as part of a complete antistatic dust extraction system, including extractors or vacuums, hoses, sleeves and couplings. Includes one...

With its modular design and tool-less base changes, the MFK 700 can easily transform from a vertical to a horizontal position with a few simple steps. Trim laminate and edge band or rout grooves for inlays easily with the light weight and maneuverable MFK 700. Packed with features, this trim router saves you money by allowing you to use bearing-less bits when used with the attachable base feeler bearing. 1/256" (1/10 mm) fine depth adjustments and exceptional dust extraction make this an ideal...

The 1010 is truly the jewel of the Festool router line. Its ergonomics, small size and light weight, allows for one-handed operation, the result is a router that's comfortable in your hand all day long. Precise depth control in 1/10th of a millimeter increments (1/256 of an inch) and is powerful enough to spin any 1/4 inch or 8 mm bit, simply adds to this router's versatility.

The 1400, if you can only have one Festool router, this would be it. It accepts 1/4, 1/2 and 8 mm bits and spins them with 1400 watts of power.

A serious router for serious router needs. The OF 2200 is the most powerful router available from Festool. It can easily plunge into 8/4 hard maple and make a 1/2 -Inch groove in a single pass. With 2200 watts of power, you might think you are working with a portable shaper. Designed for exceptional maneuverability, the OF 2200 incorporates many new ergonomic design features, making it easy to control, and a pleasure to use on the jobsite or in the shop. Although large and powerful, the OF...

Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Aluminum/Plastic Cutting blade for the TS 55 Plunge Cut Saw is designed to cut non-ferrous materials, especially aluminum; also useful for acrylics and hard plastics. This blade incorporates a TC (Triple Chip), or trapezoidal flat tooth saw blade design, wherein the edges of alternating blade teeth are beveled on both sides. These beveled teeth alternate with the...

also useful for acrylics and hard plastics. This blade incorporates a TC (Triple Chip), or trapezoidal flat tooth saw blade design, wherein the edges of alternating blade teeth are beveled on both sides. These beveled teeth alternate with the flat teeth when cutting into the material for smoother and more efficient cutting. This thin-kerfed blade design meets less resistance, for more efficient cutting, and produces less material waste. Laser cut expansion slots reduce vibration for faster,...

This 32-tooth Fine Cut Blade from Festool is designed to work flawlessly with the HK 55 and HKC 55 circular saws. This blade is ideal for operations that require a fine finished cut. - See more at: http://www.japanwoodworker.com/product/500462/festool-saw-blade-fine-tooth-32t-hk-hkc.aspx#sthash.ykNh8Yg2.dpuf

Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Fine Tooth Cross-Cut Saw blade for the TS 55 Plunge Cut Saw is an excellent blade for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods. This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately to the left and right, generating a more efficient and cleaner cut...

Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Fine Tooth Cross-Cut Saw blade for the TS 75 Plunge Cut Saw is an excellent blade for smooth cross-cutting in veneered plywood, sheet goods, melamine, and hard and soft woods. This blade incorporates an offset tooth design known as ATB (Alternating Top Bevel), allowing the blade to cut alternately to the left and right, generating a more efficient and cleaner cut...

Festool saw blades are engineered and designed for cutting efficiency, long-life, and superior cutting results. The carbide tipped Solid Surface/Laminate blade for the TS 55 Plunge Cut Saw is a long-lasting , high cut quality blade for laminate flooring and solid surface countertop material. This blade incorporates a TC (Triple Chip), or trapezoidal flat tooth saw blade design, wherein the edges of alternating blade teeth are beveled on both sides. These beveled teeth alternate with the flat...