Festool

Easily transport CT to and from the jobsite or around the shop. Easily attaches to rear of CT. Especially well-suited when using the CT to transport systainers latched to the integrated SysDock. Includes integrated nozzle and tube storage. Includes all hardware necessary to be mounted. Compatible with CT 26 and CT 36 models.

The highest standard for filtration, HEPA filters capture 99.99% of all particulate matter down to .3 microns. HEPA filters (High-Efficiency Particulate Air) have quickly become the new standard for wood dust collection, both in the workshop and on the jobsite. Measured in microns, wood dust is particularly troublesome to remove from an environment once it is airborne. The best way to minimize the effects of dust created during fabrication is to use tools that are designed with dust extraction...

With the LR 32 Hole Drilling System from Festool, you can precisely and efficiently build cabinets using the European frameless 32 mm system. Invaluable for placing cup hinges (35mm) or setting shelf pin holes (based on 32mm spacing) in casework, this portable line boring system allows you do in the field what has traditionally been a shop-only job, possible only with large stationary equipment. For use with the Festool OF 1010 and OF 1400 routers and guide rail system, the LR 32 System is...

Festool's Antistatic hose design helps you work cleaner by preventing dust from accumulating on the exterior of the hose. It helps you work more safely by preventing static discharge or shocks. And you'll work more efficiently with a system that prevents clogging due to particulate buildup inside the hose. A durable, pliable design withstands heavy use and prevents kinking, for longer service life and more efficient work. Includes: 36mm x 3.5m (1 7/16 inch x 11.5 ft) Antistatic hose with...

The Festool non-antistatic hose is designed as an economical option for use with non-antistatic dust extraction systems or vacuums. The 50mm non-antistatic hose will fit or adapt to the Festool CT 22 and CT 33 Dust Extractors and all Festool cleaning sets. A rotating connector prevents twisting and kinking, helping you work more efficiently. A tight-fitting reducing sleeve adapts for secure inside or outside fit to tool or cleaning accessory. Dimensions: 1-15/16 in x 13 ft (50 mm x 4 m).

The Festool Hose Garage provides a convenient way to keep your suction hose at hand and offers protections for your hose and cord during transport and storage. The Hose Garage mounts easily, without the need for tools, to the top of the CT 22 and CT 33, extending the SysDock docking station without increasing the overall footprint of your dust extractor. The SysDock docking feature turns the CT into a mobile cart, allowing you to stack multiple Systainers for transport or storage. Made of high...

Get the most out of your system by connecting various sized hoses into one long length with the Non-Antistatic Hose Reducer. Non-antistatic hose reducer for reducing from 50mm to 36mm hose or when connecting 36mm to 27mm hose. Antistatic components are only effective when used as part of a complete antistatic dust extraction system, including extractors or vacuums, hoses, sleeves and couplings. Includes one non-Antistatic Hose Reducer.

Antistatic Dust Extraction Hose with integrated sleeve protects the surface and edges of the material being sanded. In Systainer SYS 3. 11.5� (3.5m)Equipped with an integrated Plug It Cord and sleeve, this tapered hose is the ideal partner for the new ETS EC sanders as well as many of our existing sanders. Integrated 16 AWG Plug It Cord is compatible with many Festool tools. The sleeve shrouds the hose to help prevent the rib of the hose from catching on materials which may damage the surface....

2 3/8in Magnetic bit holder enables use of standard bits with Centrotec Chuck. The Centrotec shank is designed for use with the Festool Centrotec System, as well as with all standard or keyless chucks for no-slip performance. The Centrotec System was designed to provide a seamless transfer of force, eliminating bit slippage or marring of the drill bit. The weight of the drill is reduced by nearly ? pound, and the length is reduced by nearly 1-1/2? with the Centrotec System. Most importantly,...

High-quality industrial design; aluminum. Width 14 5/8" (370 mm); 2 casters, 2 brush inserts.

The HS 75/3 bi jigsaw blade is a bi-metal blade for for fast cuts in a wide range of materials. Ideal for plastics (soft and hard), ABS, HDPE, Plexiglas, acrylics, cement board, iron, steel, and similar materials. The cross-set teeth deliver very fast cuts. Festool bi-metal blades offer a significantly longer useful life than other blades, especially in tough materials like hard plastics or laminates. Festool jigsaw blades are engineered for cutting efficiency, long life, and superior cutting...

The S 50/1.4 K jigsaw blade is an excellent blade for scroll-cutting and making tight curves in a wide range of materials. Achieve very good results in softwood, hardwood, melamine, veneered plywood, chipboard, soft plastics, ABS, HDPE, hard plastics, Plexiglas, acrylics and similar materials. The conical ground teeth and 18 TPI ensure very fine cuts even in delicate materials. Festool jigsaw blades are engineered for cutting efficiency, long life, and superior cutting results, with a...

The S 75/2.5 jigsaw blade is an excellent choice for fine cutting in a wide range of materials. Precise, clean cuts can be achieved in softwood, hardwood, melamine, veneered plywood, chipboard, soft plastics, ABS, HDPE and similar materials. The conical ground teeth ensure fine cuts even in delicate materials. Festool jigsaw blades are engineered for cutting efficiency, long life, and superior cutting results, with a universal T-shank design that fits most professional jigsaws. Festool has the...

The S75/4 is an excellent blade for fast and clean cuts in softwoods, hardwoods, melamine, veneered plywood, and chipboard. The cross-set teeth are perfect for both fast and clean cuts. Works well as general purpose blade with a strong performance and very good value. Festool jigsaw blades are engineered for cutting efficiency, long life, and superior cutting results, with a universal T-shank design that fits most professional jigsaws. Festool has the right blade for any application or type of...

The S 105/4 is an excellent blade for fast and clean cuts in softwoods, hardwoods, melamine, veneered plywood, and chipboard. The cross-set teeth are perfect for both fast and clean cuts. Works well as general purpose blade with great performance and a very good value. Festool jigsaw blades are engineered for cutting efficiency, long life, and superior cutting results, with a universal T-shank design that fits most professional jigsaws. Festool has the right blade for any application or type...

Thicker than any other jigsaw blade available today, the Festool CARVEX is the standard by which other blades are measured. When combined with the Festool jigsaw, the S 145/4 FSG?CARVEX?is capable of making perpendicular cuts in hard to cut materials up to 4 3/4 inches thick with speed and ease. The cross-set tooth design is ideally suited for making very fast cuts in softwoods, hardwoods, melamine, veneered plywood, and chipboard, among many others. Festool jigsaw blades are engineered for...

Thicker than any other jigsaw blade, the Festool CARVEX is the standard by which other blades are measured. When combined with the Festool jigsaw, the S 75/4 FSG CARVEX is capable of making perpendicular cuts in hard to cut materials up to 2 1/8 inches thick with speed and ease. The cross-set tooth design is ideally suited for making very fast cuts in softwoods, hardwoods, melamine, veneered plywood, and chipboard, among many others Festool jigsaw blades are engineered for cutting efficiency,...

Using the right blade is one of the easiest ways to improve your work. Get the best results while using your Kapex by having the right blade for the job. Includes one of each: Fine Tooth Blade (495 387) and Universal Blade (495 388). Save versus purchasing separately.

High-quality industrial design; aluminum. Width 17 11/16" (450 mm); 2 casters, 2 brush inserts.

Affixing to the rib, or guide on top of the Festool FS Guide Rail, the Limit Stop can be used to provide secure stop points for repetitive cutting and for routing with most Festool routers. With a seamless fit to the rear of the TS plunge cut saw's sole plate, the Limit Stop also helps reduce the risk of kickbacks for plunge cut starts. Though Festool TS saws are packaged with a single Limit Stop a second stop is useful for pairing as a stop or start point. Includes one Limit Stop.

Festool's Duplex LS 130 EQ linear sander makes detail sanding faster, easier, and cleaner. Rabbets, edges, and profiles are best sanded by a linear motion. Until now, the only tool that could do that was your hand, and there is no dust extraction when sanding by hand. But the LS 130 linear sander powers through detail sanding faster, more efficiently, and without the fatigue. As common as these jobs are, the LS 130 is sure to provide major savings in time and effort.

Re-usable heavy-duty Filter Bag with integrated cap. Designed for easy and fast debris disposal. Compatible with the CT SYS mobile dust extractor.

Replacement filter for applications not requiring HEPA filtration. Filters particles down to 1 micron in size. This filter should not be used for EPA RRP tasks. Compatible with Festool CT 26 and CT 36 dust extractor models. Includes one (1) standard filter element.

Redesigned for 2008, the height has been adjusted to make work more comfortable. New V-groove channels make adjustments both faster and easier. Both the fence and the miter gauge have been redesigned for better stability and more accurate results. The MFT/3 has 85% more working area than the older MFT 800, and is 15% lighter than the MFT 1080. Even though the MFT/3 has many improvements, we did not abandon features that you have come to trust and enjoy�features like perforated tops, side...