Makita

The 18V X2 LXT Lithium-Ion (36 V) cordless 7-1/4 In. circular saw (model XSH01Z, tool only) is the worlds first cordless 7-1/4 In. circular saw powered by two 18V batteries. The XSH01X provides the performance of a corded saw without leaving the strongly-preferred 18V platform.

The 18 Volt X2 LXT Lithium-Ion (36 Volt) cordless blower (XBU01Z, tool only) is powered by two 18 Volt LXT batteries, so users get 36 Volt power and run time for corded and gas-powered demands, without leaving the 18 Volt LXT platform (batteries and charger are sold separately). Its part of Makita's expanding 18 Volt LXT series, the worlds largest cordless tool line-up powered by an 18 Volt Lithium-Ion battery. The Makita 18 Volt LXT battery has the fastest charge time in its category, so the...

The 18V X2 LXT chain saw (model XCU02Z) is powered by two 18V LXT batteries (36 V), so you get 36 V power and run time for corded and gas-powered demands, without leaving the 18V LXT platform. Batteries and charger are sold separately.

The 2 in. AVT rotary hammer (model HR5212C) has over 45% less vibration than the previous model. It is engineered with enhanced anti-vibration technology (AVT), a synchronized three-component system for significantly less vibration. The result of the enhanced AVT is a category-leading vibration rating of 9 m/s. The powerful 15 AMP motor delivers 19.1 joules (14 ft. lbs.) of impact energy. An added feature is the option of lock-on or trigger-activated in the chipping only mode, with a push...

The Makita 20 lb. Demolition hammer accepts SDS max bits and provides a hard hitting 18.8 lbs. of impact energy. The constant speed control applies additional power to the motor to maintain speed under load. The soft start feature suppresses start up reaction for more control and better accuracy while the variable speed function enables the user to match the speed to the application. The 12 bit angle settings allow the bit to be set at different positions for operating convenience.

Tough on concrete, not on you. Makitas hard-hitting HM1214C 27 lb. Breaker hammer is equipped with anti-vibration technology (AVT), an exclusive counterbalance system that reduces vibration. The result is more efficient hitting on the concrete and less vibration in the tool and the tool user. 14 AMP power the HM1214C with AVT is engineered to be the most efficient breaker hammer in its class with a 14 AMP motor that provides 950-1,900 BPM and 25.7 joules of impact energy with less vibration....

Makita 9903 3 In. x 21 In. variable speed belt sander with cloth dust bag. 3 In. x 21 In., variable speed belt sander with electronic speed control, powerful motor, auto tracking belt system, front grip design for comfortable operation, dust bag for A cleaner work environment, sander includes abrasive belt & dust bag. Variable speed belt sander with powerful motor. Quietest sander in its class at 85 decibels; unique design allows flush sanding to the corner of the wall with nose and side of...

At 84 dB, the Makita 9920 belt sander is the quietest sander in its class. The sander has variable speed (690-1, 440 ft./min.) with electronic speed control. The 9920 also has a front grip design for more comfortable operation, and a 16.4 Ft. power cord for easy maneuverability.

The Makita KP0800K 3-1/4 In. planer delivers power, cutting capacity and ease of use. It is ideal for professional construction framing, window and door installation, and fine woodworking. The KP0800K features a 6.5 AMP motor that delivers more output power, with a two-blade cutter head and 17,000 RPM for increased stock removal and superior finishes. The KP0800K is equipped with double edge carbide blades for added performance, and can plane up to 3-1/4 In. wide and 3/32 In. deep in a single...

Precision gearing and ball and needle bearing construction mean smooth and efficient power transmission. A rocker-style reversing switch lets you go from forward to reverse with one hand. The side handle on this tool adjusts 360 degrees for awkward drill angles. Makita design means double insulation for longevity, and externally accessible brushes that swap out fast for quick maintenance powerful 9 A motor generates maximum torque of 433 Ft. lbs. Wrench delivers 1600 BPM, 1700 no-load RPM....

With a 10-5/8 in. long body and 2-5/8 in. head width, the Makita 3/8 in. Angle drill (model DA3010F) provides a compact solution when working between framing studs and other close quarter applications. The paddle switch with variable speed provides increased user convenience, and the torque-limiting clutch is engineered to disengage the gears if the bit binds. The LED light illuminates the work surface for improved visibility.

Powerful 14 AMP motor (730 - 1,450 BPM) to handle the most demanding applications. Constant speed control automatically applies additional power to the motor to maintain consistent speed under load for the most challenging jobs. Soft start suppresses start-up reaction for more control and better accuracy. Variable speed control dial enables user to match the speed to the application for greater versatility. L.E.D. Service light notifies the user approximately 8 hours before the brushes need to...

The new Makita wet stone polisher is precision engineered for a professional finish every time it makes contact with granite, marble, limestone and more. This polisher can tackle the most demanding polishing, sanding, shaping and light grinding jobs and is equipped with soft start technology, electronic speed control and a variable speed dial range of 2,000 to 4,000 RPM. The PW5001C has without a doubt the performance, innovation and technology demanded by professionals. Don't settle for less...

The Makita 4,000 RPM drywall screwdriver (model FS4200) delivers speed, power and ergonomics for drywall applications. It is ideal for driving drywall screws into steel studs. The FS4200 is powered by a 6 AMP motor that delivers 0-4, 000 RPM and includes a large variable speed trigger with lock-on button for continuous use. The adjustable depth locater assembly with Makita's sure-lock feature is engineered for consistent screw depth. The FS4200 has an ergonomic grip for increased comfort, and...

Makita 9564CV 4-1/2 In. angle grinder. This industrial angle grinder from Makita delivers superior power in a compact design. With an improved 12 AMP motor and five stage variable speed control, you can get the power you need for a wide variety of jobs. The super joint system prevents tool kickback and gear damages caused by accidental wheel binding. The larger and improved carbon brush material offers a longer tool life while the electronic limiter stops the motor and prevents accidental...

Powerful motor delivers more output and 10,500 RPM for the most demanding applications. Super Joint System (SJS) technology helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to a stop. Larger cooling fan and blades pull more air through the motor to help maintain lower operating temperature. Tool-less wheel guard adjustment for easy adjustment. Large flush-mount paddle switch with lock-off for comfortable operation.

Powerful 6.0 AMP motor delivers 11,000 RPM for the most demanding applications. Small diameter barrel grip (only 2-3/16 In.) with paddle switch for added comfort. Labyrinth construction seals and protects the motor and bearings from dust and debris for longer tool life. Refined design at only 4.2 lbs. for reduced operator fatigue. Paddle switch design with no lock-on for added user preference. AC/DC switch for use with alternative power source. Side handle is positioned at an increased 20...

Makita's 9557PB 4-1/2 In. angle grinder has and an extra large paddle switch for easy operation. The powerful motor is ideal for professional grinding applications. The 9557PB features a small circumference barrel grip for easy handling, labyrinth construction for protection from debris and 90 rotating gear housing for better operator control. Additional design details include a lock-on/off feature for continuous operation and AC/DC switch for use with alternative power sources. Kit includes:...

Smooth and fast sanding with 3.0 AMP motor (12,000 OPM). Large 1/8 In. random orbit action for fast and super smooth sanding. Pad control system for controlled pad speed upon start-up. Efficient through-the-pad dust collection system for a cleaner environment. Dust sealed with minimizes contamination. Rubberized grip for improved operator comfort and control.uses quick change 5 In. (8 hole) hook-and-loop abrasive paper. Oversized sealed ball bearing construction for longer tool life. 5 In....